3
Note: Ensure that the side panels are
pushed fully down with the bolt heads
located to the top of the slots.
Note: Begin with the headboard.
10mm
(3/8")
Y
V
V
X
X
step
1
Unscrew the bolts on the headboard and footboard by approximately 10mm (3/8”).
While holding the headboard upright, hook the side panels onto the bolts.
Hook the side panels onto footboard, hand tighten all the bolts. Ensure that the bed is square (90° at all
corners) then tighten all of the bolts fully on the headboard and footboard, using the ring spanner supplied.
step
2
L
x1
Note: On legs where an additional
locating screw is supplied, please fit
to hold legs square to the corners.
Attach the legs to the headboard and footboard.
Fittings
Z