Shamley Storage Bed - Assembly Guide
2
a
x16
b
x16
c
x16
d
x1
a
b
c
Fit bolts to
headboard &
footboard
like this
a.
b.
Make certain the bed is squared up,
as shown in the diagram.
Once all four corners are
located, make sure the bed
is still square, then tighten
all the bolts 100% using
Allen key (d).
Fit the side rails locating
the brackets behind the
flat washers.
Loosely insert four bolts (a)
with spring washers (b) & flat
washers (c) into each side of
headboard & footboard (A&B).
10mm
Note: Do not tighten fully
but leave 10mm protruding
as in the diagram
B
A
&
B
C
C
C
A
5
