16
Burn-out direction (setting range: L or H)
—————————————————————————————————————————————
Allows you to set how the input reacts if an input error such as open loop, under-range, or over-range is
detected.
setpoint
Input value at input error
Alarm setting
Upper limit
Upper limit alarm
Lower limit
Lower limit alarm
Notes:
You cannot set
for the alarm 1 and the alarm 2 independently.
Change of
setting does not affect the error codes appear on the display.
Error code
Description
7KHUPRFRXSOHEXUQRXWRSHQORRSRILQSXWOLQH
2YHUUDQJH39EH\RQGRI)6
7KHUPLVWRUEXUQRXWRSHQORRSRILQSXWOLQH
8QGHUUDQJH39EHORZRI)6
[Setting example] Setting the burn-out direction to the lower limit —————————————
Press the key for 7 seconds.
appears.
1.
3.
Use the and keys to access .
2.
Press the key once.
The setpoint ( ) is displayed.
Use the and keys to change to .
4.
To go back to the operation mode (PV display), press the key for 3 seconds.
6.
Press the key once.
The display changes back to when the change is complete.
(If you want to check the result, repeat the steps 3–5.)
5.
PV
PV
Display
Operating procedure
PV
display
PV
display
SEL
SEL
SEL
SEL
