FE FSH, Instruction Manual

Page: 49 / 181

INF-TN1FSH-E
- 41 -
4.2. Setting item list
Refer to Appendix “8.5. Composition of key operation ” for details of composition of key operation.
Measurement
screen Piping specifications
( FUNC PIPE )
4.4.2.
Range unit, range type, full scale 4.4.4.1.
Output limit 4.4.4.2.
Output setting
( FUNC RANGE )
BURNOUT 4.4.4.3.
Rate limit 4.4.4.4.
Damping
( FUNC DAMP )
4.4.5.
Zero adjustment
( FUNC ZERO )
4.4.6.
Display setting
( FUNC DISP )
4.4.7.
Low flow rate cutout
( FUNC CUT OFF )
4.4.8.
Total unit 4.4.9.1.
Total pulse (Total rate, pulse width) 4.4.9.2.
Integration
( FUNC TOTAL )
Total preset 4.4.9.3.
Total switch 4.4.9.4.
BURNOUT 4.4.9.5.
Flow switch
( FUNC FLOW SW )
4.4.10.
Status output
( FUNC STATUS )
4.4.11.
Output calibration
( FUNC CAL )
4.4.12.
System unit 4.4.13.
System language 4.4.14.
System
( FUNC SYSTEM )
Serial communication 4.4.15.
Calibration and check of analog output 4.4.16.1.
Check of status output 4.4.16.2.
Calibration of wedge temperature 4.4.16.3.
Check of wedge temperature 4.4.16.4.
Test mode 4.4.16.5.
Measurement method 4.4.1.
Sensor
(Mounting method, type, constant, transmission voltage) 4.4.1.
Measurement mode 4.4.3.
LCD backlight 4.4.17.
Key lock 4.4.18.
Transit time 4.4.20.1
Pulse Doppler 4.4.20.2.
Details of measurement
*1
( FUNC DETAIL )
Initialization 4.4.20.3.
*1) Intended for our service personnel.