- 62 -
INF-TN1FSH-E
4.4.9. Integration
4.4.9.1. Total unit
Description
The measurement value (flow rate) can be integrated as follows.
(1) Total unit
Select one from the following total units:
mL, L, m
3
, km
3
, Mm
3
, mBBL, BBL, kBBL
Note: Set the total mode
*1
to total stop state to make the setting.
Operation
(example)
When starting integration using m
3
as total unit
Key operation
Description
Display
FUNC TOTAL
Display “TOTAL MODE”
TOTAL MODE
TOTAL STOP
#
Select “TOTAL UNIT”
TOTAL UNIT
mL
ENTER
"
or
#
ENTER
Enter select/enter mode, select “m
3
,” and
press ENTER.
TOTAL UNIT
m
3
ESC
Return to “TOTAL MODE”
TOTAL MODE
TOTAL STOP
ENTER
"
or
#
ENTER
Enter select/enter mode, select “TOTAL
RESET,” and press ENTER.
TOTAL MODE
TOTAL RESET
ESC
Display the measurement, reflecting the
setting.
(Measurement display screen)
*1) The following total modes are available.
TOTAL STOP: Stops integration. If integration is not stopped, setting cannot be changed.
TOTAL RUN:
Starts integration. Used to start integration from stopped state.
TOTAL RESET: Starts integration, making the total value to total preset value.
If power is restored after power failure, etc., operation is started from the total mode state before the power failure.
