FDS-TP Thermal Printer
–
User manual
September 2017 - Version EN 1.1
www.fdstiming.com
5.
Button Operating Instructions
POWER (Blue LED)
FEED (Red Led)
Printer Status
OFF
OFF
Printer Off
ON (Always)
OFF
Printer On, paper is present but
lid is open
ON (Always)
Flash
Printer On, no paper present and
lid is open
ON (Always)
ON (Always)
Printer has paper and ready
Under the normal working status, the paper feeding
begins when you press « FEED » button, and stop
when you release « FEED » button
The printer paper feed
Power off the printer, then hold down the « FEED »
button and press the power button at the same time.
Wait 2 seconds, then release the « FEED » button, the
current setting will be printed out.
Printer self test
Power off the printer, then hold down the « FEED »
button and press the power button at the same time.
Wait until the power indicator & « ERROR » led are
both on, and the « ERROR » led goes out, then
« ERROR » button, the density setting status, will be
printed out (it has three levels for the printing
density), the current density status is indicated
(Low – Middle – High)
Set printing density