Document Number:
MAN
– FD932DVD-BLU-2 (VER X)
Rev:
D
Revision Date:
07/11/2017
Page 10 of 27
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Video Wiring Suggestions
Avoid routing video wiring parallel to:
•
AC wiring
•
Strobe wiring
•
DC motor supply cables
•
Inverter cabling
•
Or any other potential noise source.
The recommended cable for both composite and SDI is PIC 75 Ohm Coax, P/N V75268.
This is a lightweight, flexible, and low signal loss cable which meets FAA flammability
requirements of FAR 23.1359(d), FAR 25.853(a) and FAR 25.869(a)(4).
Similar aviation coaxial cable can be used from other vendors, as well. Some aircraft are
prone to AC noise - we recommend adding to the composite source a 75Ohm video
isolation transformer such as Deerfield Laboratory, Inc. Part No. 162-1
(www.deerfieldlab.com, (650) 632-4090. In most cases this should be added to the video
output of the source.
