Document Number:
MAN
– FD220CV-C-1
Rev:
C
Revision Date:
01/10/2017
Page 4 of 16
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Specifications
Display Type
21.5” TFT Color LCD
Display Color
16.7 Million Colors
Screen Resolution
1920 x 1080
Brightness
300 cd/m
2
Dimensions
19.5”(W) x 11.5” (H) x 1.675”(D)
Display Size
18.75”(W) x 10.55”(H)
Weight
9.75 Lb.
Power @ Amp
28V DC @ 1.94A Max. Cont. steady-
state
Video Type Supported
NTSC/PAL
Video Sources
HD-SDI (In-Out), DVI-D, Industry
Standard VGA, S-Video, Composite
Screen Control
On Screen Display Menu
Viewing Angle
178° on Both Axis
Materials
Aluminum
Remote Control
IR, included
Pixel Pitch
248.25 x 248.25 mm
Operating Temperature
0-50° C (32-122° F)
Additional Test Certifications
FD220CV: DO-160, Sec 21, Cat M
DO-160 Sec 21, Cat B
CSA – C22.2 No. 228-92/UL1418 -
DO-160, Sec 7, Cat B
Installation Instructions
All cabin equipment, such as the FD220CV-C-1, should be installed on a non-essential bus
and have a dedicated circuit breaker. It is a requirement that a switch be installed in the
cockpit so that the pilot can de-energize the system should it become necessary.
There are (10) 8-32 UNC mounting holes located on the sides and back of the display. Six
mounting points are located on the rear and two on each side of the bezel. See installation
drawing at end of manual for dimensional details.
Power
This is a
28VDC
monitor that requires 1.94 Amps of maximum continuous steady-state
power to operate. The unit turns on automatically upon power application.
