FDS FD171CV-C-1, Installation And Operation Manual

Page: 11 / 16

Document Number:
MAN
– FD171CV-C-1
Rev:
C
Revision Date:
10/12/2011
Page 11 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Operation Instructions
The FD171CV-C-1 is continuously on but can be de-energized by removing power from the
video system. No pilot or aircrew action is necessary during flight or ground operation.
The operator will be able to change the video output from the FD171CV-C-1 using the
video source select button on the display.
When applying 28VDC power, the display will turn on and look for a valid input on the last
known source. If no input is found, the display will go to standby mode. Pressing the Select
button will select new video input.
Button Controls
Located at the top (center) of the FD171CV-C-1are 8 buttons. Their functions are shown
below:
BUTTON DESCRIPTION
POWER Toggles the power ON or OFF. Also, wakes the display
up from SLEEP mode.
MENU Opens the MENU.
AUTO Auto-
adjusts the display’s size and position.
DOWN Moves to the next selection in the menu.
UP Moves to the previous selection in the menu.
LEFT
Decrease the selection’s value in the menu.
RIGHT
Increases the selection’s value in the menu.
SOURCE Switches between sources coming into the display.