Document Number:
MAN
– FD151CMT
Rev:
E
Revision Date:
05/15/2017
Page 4 of 14
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Specifications
Supported Resolution
XGA 1024x768
Display Brightness
400 cd/m
2
Display Dimensions
14.14
”(W)
x
11.95
”(H)
x 1.
1
”(D)
Mount Dimensions
–
STOWED
Mount Dimensions
–
DEPLOYED
15.87”(W) x 15.
8
7”(H) x 1.88”
(D
15.87”(W)
x 15.
8
7”(H)
x
13.90
”
(D)
LCD Dimension
11.89
”(W)
x
8.89
”(H)
Weight
14.74 lbs.
Power
28VDC @ 1.5 Amps
PC Video Input
VGA (High Density DB-15 Connector)
Video Input
2 Composite
Video Type Supported
NTSC/PAL
Screen Control
On-Screen Display Menu
Remote Control
IR, included
Case Materials
Aluminum
Mount Type
Piston Hinge Ceiling
Installation Instructions
All cabin entertainment equipment, such as the FD151CMT, should be installed on a
non-essential bus and have a dedicated circuit breaker. It is a requirement that a
switch be installed in the cockpit so that the pilot can de-energize the entertainment
system should it become necessary.
The order in which you proceed is up to the installation center. We suggest that you
first look at the mounting plate prior to installing the LCD to make sure you have the
proper room and conditions in the aircraft to mount the display to the ceiling. Most
aircraft have a significant curvature in the headliner and it will probably be necessary
to modify the headliner to mount to a structure that will hold this mount.
Once it has been determined that you have sufficient room and mounting locations for
the FD151CMT, then it would be appropriate to start mounting the base to the frame.
The FD151CMT is attached to the aircraft with eight #10 screws. There are eight
attach points on the top plate.
There is one DB-
15 male connector on a 12” cable coming from the LCD, used for
power, VGA, and two composite inputs.
