FDS FD102CV-C-1 Installation And Operation Manual Download Page 12

 

Document Number: 

MAN 

– FD102CV-C-1

 

Rev: 

Revision Date: 

04/27/2017 

Page 12 of 13 

 

 

©

 

2017 FDS Avionics Corp.  

All Rights Reserved. 

TECHNICAL SUPPORT 

470-239-7421 or FDSAvionics.com

 

 

Warranty Information 

All  FDS  Avionics  Corp.  (FDS)  products  are  warranted  to  be  free  from  material  or  manufacturing  defects  for  a 
period  of  24  months  from  the  date  of  shipment  for  General  Aviation  customers  or  12  months  from  the  date  of 
shipment for Government/Special Mission customers.  Any material or repair workmanship for in warranty repair 
service  will  be  specifically  warranted  for  90  days  or  the  remainder  of  the  original  warranty  period,  whichever  is 
longer.    If  the  original  warranty  period  has  expired,  the  90  day  repair  warranty  is  limited  to  the  material  and 
workmanship specific to the repair activity completed. 

The following conditions are exclusions to warranty coverage: 

1.  Labor costs associated with installation, removal or reinstallation of any product. 
2.  Damage to or malfunction caused by any unauthorized alteration made to the product. 
3.  Resolving  signal  quality  issues  caused  by  externally  generated  noise  introduced  by  aircraft  electrical 

systems or other components connected to any FDS product. 

4.  Any  malfunction  caused  by  improper  installation  or  connection  to  aircraft  wiring,  industry  standard  cabin 

management/  inflight  entertainment  systems,  or  third  party  commercial  equipment  not  specifically 
identified as compatible with FDS products. 

5.  Any  malfunction  caused  by  installation  that  does  not  conform  to  precautions  associated  with  operating 

environments  listed  in  the  operating  manual  or  consistent  with  industry  best  practices  such  as;  high 
temperature, adequate ventilation, high humidity, high dust, or power surges. 

6.  Cosmetic  damage  or  damage  to  internal  components  caused  by  installation  or  removal,  failure  to  follow 

installation or operating instructions, or any neglect or misuse of the product. 

7.  Any  product  that  is  returned  for  service  with  a  broken  tamper  evident  seal,  indicating  tampering  or 

improper handling of the product by an unauthorized person. Violation of product tamper evident seals or 
modification of factory installed serial and PMA labels voids any warranty, either expressed or implied. 

The  FDS  technical  support  team  is  available  to  provide  distance  troubleshooting  support  during  business  hours 
(8:00am to 5:00pm EST) Monday through Friday at (470) 239-7421. 
 
Many repair requests can be resolved through distance support and may not require return of merchandise to the 
factory.  If a product must be returned to the factory for repair, an RMA number will be issued as directed by the 
technical support team and communicated by the repair coordinator.   
 
Upon request by the customer, FDS may send a service technician onsite to repair any non-PMA products.  The 
travel e

xpenses incurred to include transportation, lodging and meals along with the technician’s hourly rate shall 

be payable by the customer in accordance with FDS’ applicable rates and procedures. 
 
FDS Avionics Corp. will, upon receipt of returned merchandise, remanufacture or replace the unit at our discretion 
and  return  the  product  by  Ground  Return  Shipping.    Express  return  shipment  will  be  the  responsibility  of  the 
sender. 
 
This warranty is not transferable. 
 
Any implied warranties expire at the express limited warranty expiration date.  FDS shall not be held liable for any 
indirect, special, punitive, incidental or consequential damages. 
 
Some  states  do  not  allow  limitation  on  the  length  of  an  implied  warranty.    In  such  states,  the  exclusions  or 
limitations of this limited warranty may not apply. 

Summary of Contents for FD102CV-C-1














Reviews: