FDI uEZGUI-EXP1 User Manual Download Page 2

 

 

Table of Contents 

Introduction  _________________________________________________________________  1 
Functional Description  _________________________________________________________  1 
Expansion Board Capabilities ____________________________________________________  1 
Orderable part numbers ________________________________________________________  1 
Expansion Connector  __________________________________________________________  1 
Expansion Connector Cable Details  _______________________________________________  3 
DC Power Input – P4 ___________________________________________________________  3 
USB Device – P1  ______________________________________________________________  3 
USB Host – P2 ________________________________________________________________  4 
Ethernet – J2 _________________________________________________________________  4 
Supported uEZGUIs ____________________________________________________________  4 
Serial Port – P3  _______________________________________________________________  5 
Example Connections to the uEZGUI Boards  ________________________________________  5 
 

Information in this document is provided solely to enable the use of Future Designs products. FDI assumes no 
liability whatsoever, including infringement of any patent or copyright. FDI reserves the right to make changes to 
these specifications at any time, without notice. No part of this document may be reproduced or transmitted in 
any form or by any means, electronic or mechanical, for any purpose, without the express written permission of 
Future Designs, Inc. 996 A Cleaner Way, Huntsville, AL 35805.  
 
For more information on FDI or our products please visit www.teamfdi.com. 
 

 

NOTE: 

The inclusion of vendor software products in this kit does not imply an endorsement of the product by 

Future Designs, Inc. 

 2014 Future Designs, Inc. All rights reserved.  

 
uEZ® is a registered trademark of Future Designs, Inc. 
Other brand names are trademarks or registered trademarks of their respective owners. 
 
FDI PN:  MA00030 

 

Revision: 2.0, 08/13/2014 
Printed in the United States of America 

Summary of Contents for uEZGUI-EXP1









Reviews: