FDI ELI70-IRHW, Quick Start Manual, Page: 2 / 3

ELI70-IRHW, ELI70-IPHW,
ELI70-IRHW-M & ELI70-IPHW-M
Quick Start Guide
Page
2
08/23/2018
Copyright ©2018, Future Designs, Inc.
Revision 1.4
3. Apply Power to ELI with a 12VDC +/- 5% 2.0A power supply such as the Digi-key PN: T1071-P5P-ND or
Mouser PN: 552-PSA-24A-120-R (See Figure below).
4. Once you have verified or configured your SBC for the proper resolution, power on your SBC.
5. The ELI display will power on and show the output from the SBC.
6. Touch Screen Calibration should be performed in your operating system following one of the application
notes (Linux, Windows 7, or Windows 10) found here: https://www.teamfdi.com/product-details/eli70-
irhw#documentation .
ELI70-IRHW & ELI70-IPHW Connections
Power may be supplied either via the 2-pin terminal block J4 or via the 2.1mm power jack P2 (center positive)