ELI43-Cx Linux Calibration
Linux Calibration Guide
Rev. 1.0 May 17, 2018
Page 3
2.
Calibrating your ELI
The following steps will guide you through performing an OS-level touch screen calibration for
computers using Windows 10. After the display is detected, the display settings must be changed to
set the ELI as a secondary display. Once this is done, then the calibration can be run.
1.
Press the Windows button,
,
then type “display” to search.
Figure 2. Opening Display settings
2.
Click on
Display settings.
3.
For
Multiple displays
, select
Extend these displays.
Figure 3. Extending the display to ELI
4.
If prompted, select
Keep these settings.
