9
MONTERING
Assembly
Choosing Securing
Bolt Position
1. Set the Sidekick Smoker on your side burner.
Position the magnetic legs (11) on the side burner so
that the Sidekick Smoker is level. You may need a
small level for accuracy (See Fig 8). If the Sidekick
Smoker position is not level, move the magnetic legs
along the “L” slot and/or adjust the height of the legs
until the Sidekick Smoker sits level.
2. The Securing Bolt is used to secure your
Sidekick Smoker to the side shelf of your gas BBQ.
It replaces one of the magnetic legs. Some side
shelves have access in the shelf that allows the bolt
to mount through the side shelf and allow it to be
secured. If there is no access, choose a location
(preferibly to the rear of the BBQ).
Remove the Sidekick Smoker and drill
a 8 mm (5/16”) diameter hole.
Securing the Sidekick Smoker
with Securing Bolts
1. Screw a large nut (H) and slide a large
washer (D) on the securing bolt (12)
(See Fig 10 a).
2. Insert the securing bolt (12) through the
hole in the side burner shelf. Add a large nut
(H) and slide a large washer (D). Hand tighten
(see Fig. 10 b.).
3. Move the Sidekick Smoker into position
on the Sidekick by inserting the securing bolt
through the appropriate “L” shape channel.
Slide a large washer (D) and a large nut (H)
and hand tighten (see Fig. 11.). Adjust the Hex
Nuts on both ends of the securing bolt until
the Sidekick Smoker is level and secure.
NOTE:
DO NOT DRILL
THE HOLE NEAR
MOUNTING
BRACKETS, GAS
VALVES OR GAS
HOSES.
7
8
