●
IF THE BURNER DOES NOT IGNITE, TURN THE SWITCHES TO THE OFF
POSITION (CLOSE THE GAS SUPPLY) AND WAIT 5 MINUTES BEFORE TRYING
TO IGNITE AGAIN.
●
IF THE GRILL STILL DOES NOT LIGHT WITH NORMAL OR MANUAL METHOD,
READ THE TROUBLESHOOTING TABLE OR CONTACT YOUR DEALER.
LIGHTING INSTRUCTIONS
1.
Make sure all switches are in the ”OFF” position (red line points upwards).
2.
Open the lid. The lid must always be open when the grill is lit.
3.
Open the gas from the gas cylinder with the regulator.
4.
Push in the switch until the desired burner enters and turn it to the left /
counterclockwise. The burner lights up automatically.
5.
When the burner is lit, the next burner can be lit in the same way. Light the
remaining burners as needed.
TIP:
Preheat the grill for about 10-15 minutes at maximum temperature. After heating,
adjust the burners to the desired performance in relation to what is to be grilled.
If the burners do not light up after 5 seconds, put all the switches in the “OFF”
position and close the regulator on the gas cylinder.
Wait for 5 minutes. Repeat the procedure above.
MANUAL LIGHTING
If the built-in igniter does not work or if you want to light the grill manually using
a long match or a long lihghter.
Do not lean over the grill while lighting!
1.
Make sure all switches are in the ”OFF” position (red line points upwards).
2.
Open the lid. The lid must always be open when the grill is lit.
3.
Open the gas from the gas cylinder with the regulator.
4.
Light a long match and put it in the ignition
hole on the left or right side of the grill
grate.
5.
Push the burner switch closest to the
ignition hole and turn the switch to the left.
6.
Make sure the burner ignites and stays lit.
7.
Adjacent burners can be ignited by sliding
the switch and turning it to the left.
If the burners do not light up after 5 seconds, put all the switches in the “OFF”
position and close the regulator on the gas cylinder.
Wait for 5 minutes. Repeat the procedure above.
!
Lighting Instructions
19
fccbbq.com
