KEEP THE FIREBOX, COOKING GRATE
AND ACCESSORIES CLEAN TO AVOID GREASE FIRES.
Maintenance
IF A GREASE FIRE OCCUR
In case of grease fire, if possible close the gas
supply on the regulator / barbecue and
disconnectthe regulator. In the event of a minor
grease fire,wait until the fire goes out on its
own. In the eventof a major grease fire, use a
suitable extinguishing agent (CO2 appliance,
fire blanket, etc.) and tryto suffocate the fire.
NB! NEVER USE WATER TO EXTINGUISH A
GREASE FIRE.
HOW TO AVOID GREASE FIRE
Check the grease cup (20) after each grilling
and clean regularly with a nylon brush and
dishwashing detergent. How often it will be
necessary to clean will depend on how much
and type of food is grilled. To simplify cleaning
we recommend adding cat litter and/or
aluminum foil on the drip tray.
Clean the grill grate after grilling with a grill
brush and, if necessary, with soap and water.
In case of visible accumulation of grease and
food residue in the firebox, remove these with a
plastic scraper or using a nylon brush, water and
dish soap.
During preheating, check that there are no signs
of irregular flames. When grilling foods with
much fat or oil, pay extra attention. Feel free
to use trays in aluminum foil to prevent large
amounts from running down on the grease cup.
Do not leave the barbecue when it is lit and
close the gas supply as soon as possible if there
is a sign of a grease fire.
MAINTENANCE OF THE BARBECUE
•
Check regularly that the burners are
burning correctly.
•
Remove the grill grates.
•
Light the barbecue in the normal way.
•
Turn the control from low to high. Check
if there is a difference in strength, and
that the flame is clear and blue. The flame
should not be orange.
If the burner behaves abnormally, read
the troubleshooting table.
•
Remove grease and old food debris on
the burners with a nylon brush and check
that no holes in the burner are clogged.
MAINTENANCE OF THE BURNERS
1.
All controls must be in OFF mode. Check
that the gas supply is switched off and the
regulator is disconnected from the gas
cylinder.
2.
Remove the cooking grate and drip cup.
3.
Remove the screws on the burner, use a
screwdriver.
4.
Carefully lift the burners out of the valve
outlet.
5.
Use a nylon brush to clean the outside of
the burner.
6.
Clean blocked passages / channels by
using a metal string or e.g. bending a
paper clip.
7.
Check that insects, cobwebs etc. do not
block the inside of the burner. In that
case, remove this.
8.
Check if the burner is damaged. Small
holes and corrosion can occur with
normal use of the grill. Are there cracks
or holes, the burner should be replaced
with a new one.
9.
After cleaning, place the burner in place
and screw it on.
10.
Replace grease cup and grill grate.
!
NB: DO NOT USE WATER TO
EXTINGUISH GREASE FIRE!
CLEAN THE GRILL REGULARLY TO
AVOID GREASE FIRES.
14
Step 12:
将接油盒（
20
）平放在炉体下面
.
Connecting Gas Cylinder
1. ALWAYS place the propane cylinder on the tank
holder under the cart.
2. ALWAYS confirm that all burner control knobs
are in OFF position before activating the gas
supply.
3. Before connection, be sure that there is no
debris caught in the head of the gas cylinder,
head of the regulator valve, or in the head of the
burner and burner ports.
4. ALWAYS connect the gas supply regulators as
follows: Insert the nipple of the valve coupling
into the tank valve and tighten the connection
collar by turning it clockwise with one hand
while holding the regulator with the other hand.
5. Disconnect the propane cylinder from the
regulator valve when the grill is not in use.
6. DO NOT obstruct the flow of combustion air
and ventilation air to the grill.
7. Keep ventilation openings of the cylinder
enclosure free and clear from debris.
To prevent fire or explosion hazard
when testing for a leak:
1. ALWAYS perform the 'leak test'
before lighting the grill and each time
the cylinder is connected for use.
2. DO NOT smoke or allow other
sources of ignition in the area while
conducting a leak test.
3. Conduct the leak test outdoors in a
well-ventilated area.
4. DO NOT use matches, lighters or a
flame to check for leaks.
5. DO NOT use grill until all leaks have
been stopped. If you are unable to
stop a leak, disconnect the propane
supply, call for gas appliance service
or your local propane gas supplier
DANGER
20