ANALOG BACK UP CAMERA
FCA US LLC - Body Builder Instruction
All Rights Reserved
1/15/2019
Page
1
of
9
Overview
The analog backup camera (Sales Code is XAC) is available as an option on all chassis cabs with a GVWR of greater than
10,000 lbs. (DD 3500 and DP 4500/5500) It is standard on pickups (DJ 2500 and D2 3500) with box delete. (Sales code
XBC) and chassis cabs with a GVWR of 10,000 lbs. and less. (DF 3500) This system use a single analog camera. If the
vehicle has surround view (Sales Code XAK) it will have a digital loose ship back up camera. If your vehicle has the
digital system, please see document titled DIGITAL BACK UP CAMERA.
Depending upon radio option, the camera display will either be in the in screen located in the IP center stack or in the
rear view mirror. If the vehicle has the Uconnect® 3 with 3 inch non-touch display, (Sales Code UA1) the camera display
will be in the rear view mirror. On all other radio/screen combinations, (Sales codes UAA, UAM, UAV or UAX) the
camera display will be in the in center stack screen. On vehicles equipped with sales code XAC, the vehicle electronics
will be configured to operate properly once the camera is connected. Prior to connection, all monitors will display a
blue screen when the vehicle is in reverse. The table below outlines the radio, display and camera options available on
chassis cabs and pickups with box delete.
Sales Code
Radio System
Screen Size/Type
Nav/Connectivity
Camera Display
UA1
Uconnect® 3
3” Non-Touch
None
Mirror
UAA
Uconnect® 3
5” Touch Screen
None
Center Stack Screen
UAM
Uconnect® 4
8.4” Touch Screen
None
Center Stack Screen
UAV
Uconnect® 4C
8.4” Touch Screen
Nav and Cellular
Center Stack Screen
UAX
Uconnect® 12.0
12” Touch Screen
Nav and Cellular
Center Stack Screen
There are a number of electrical/wiring features at the rear of the Ram chassis and box delete pickups. These features
include the connector for the analog backup camera. The figure below shows the analog back up camera connection.
Analog Camera Connector
