FCA US Uconnect 5.0, Owner'S Manual

Page: 14 / 66

Mid and Treble. Use the “+” or “–” buttons
on the touchscreen to adjust the equalizer
to your desired settings. Press the “Back
Arrow” button on the touchscreen when
done.
•
Balance/Fade — Press the “Balance/
Fade” button on the touchscreen to adjust the
sound from the speakers. Use the “arrow”
button on the touchscreen to adjust the sound
level from the front and rear or right and left
side speakers. Press the Center “C” button on
the touchscreen to reset the balance and fade
to the factory setting. Press the “Back Arrow”
button on the touchscreen when done.
•
Speed Adjustable — Press the “Speed
Adjusted Volume” button on the touch-
screen to select between OFF, 1, 2 or 3.
This will decrease the radio volume relative
to a decrease in vehicle speed. Press the
“Back Arrow” button on the touchscreen
when done.
•
Loudness — Press the “Loudness” but-
ton on the touchscreen to select the Loud-
ness feature. When this feature is acti-
vated it improves sound quality at lower
volumes.
Clock Setting
1. If a SETTINGS button on the right side of
faceplate exists, push this button. If not, push
the MORE button on the faceplate then the
“Settings” button on the touchscreen.
2. Select the “Clock and Date” button on the
touchscreen.
3. Next, select “Set Time” to change the time.
4. Select “Set Date” to change the date.
5. To set the time, select the “Seek Up” or
“Seek Down” arrows as appropriate. Select
“12 hrs vs 24 hrs”, “AM” or “PM” or select the
“Time Zones” (if equipped).
6. Select “Done” when complete.
13