background image

19

MYRA 218S

DSP PRESET

MYRA  218S  is  a  highly  acoustically  complex  system  that 
needs  to  be  run  by  processed  amplifiers  (with  on-board  DSP) 
configured with presets specifically developed by FBT. Using the 

MYRA system with presets other than those validated by FBT, 

or without any specific presets, not only makes it impossible to 

guarantee adequate performance, but also risks compromising 
the reliability of the internal components and as such is absolutely 
prohibited.

Unprocessed amplifiers can also be used, but these will need to be 

connected upstream with a Digital Loudspeaker Processor with 
presets authorised by FBT, which guarantees proper alignment, 
equalisation and protection of the system.

N.B.  For  more  details  on  configurations  and  preset,  see  the 

dedicated document: “MYRA PASSIVE SYSTEM PRESET AND 
CONFIGURATIONS”.

CHARACTERISTICS OF DISPERSION

MYRA218S is a direct radiating subwoofer and, because the 
wavelength of the frequencies it is designed to reproduce is 
substantially greater than the dimensions of the cabinet, its 
dispersion is essentially omnidirectional.

It is, however, possible to use two appropriately positioned 
subwoofers with the appropriate presets (that make it possible 
to manage the delay, phase and level of each subwoofer) to 
produce cardioid dispersion patterns with variable rear signal 

rejection of between -9 and -16 dB approximately, depending on 
the configuration used.

See the ‘MYRA PASSIVE SYSTEM PRESET AND 
CONFIGURATIONS’ document for additional information on the 

CARDIOID configurations and dedicated DSP presets.

ACOUSTIC SIMULATION SOFTWARE

In order to optimise uniform SPL distribution across the listening 
area, FBT recommends using acoustic simulation software that 
provides the opportunity to determine the best solution in 
terms of number of cabinets, angles, positioning of the whole 

array  and  DSP  presets.  The  .GLL  files  for  the  MYRA  system 

can be downloaded from the product page of the www.fbt.it 
site and used as sound sources for the EASE FOCUS 3 acoustic 
simulation software, which is available to download for free from 
the manufacturer’s website at AFMG-focus.afmg.eu  

Summary of Contents for MYRA 218S

























Reviews: