Fbt MS02-CD3/DG, Instructions For Use Manual, Page: 8 / 24

A U D I O C O N T R A C T O R
6
• PITCH CONTROL • Adjust the tempo of the music quicker or slower.
While adjusting the tempo of the music, the original musical key of the tune can be maintained.
• Low: to adjust slow tempo play; press once, the screen will show "PH01", press one time, it will be +1. It has 10 levels of tempo variation.
• Hi: to adjust fast tempo play; press once, the screen will show "PH -01", press one time, it will be -1. It has 10 levels of tempo variation.
• Nor: press to back to normal tempo.
• • Recording function key, need to use this key to record through the line-in channel REC
- When only single USB or SD CARD in the device, can only use record function under "STOP" mode.
- Press "REC", LCD shows "WAIT REC". This is waiting for USB or SD CARD to ready mode. When LCD shows "STAND BY" press "REC" again
to start to recording, LCD starts to show the current recording time, the REC LED light will turn on
- During recording press "REC" to pause recording, press "REC" again to continue recording.
- Press "STOP" to finish recording. The LCD will show "REC STOP". It will return to "STOP" mode, the REC LED light will turn off.
- Sound recording through the REC function keys are saved in the directory folder REC
- The track number in the REC folder will start from "R01", and increase gradually. Therefore if want to check the recording file after finish record,
the song will be recorded at the last track in the REC folder.
- To see the record track in computer, the record track will save in REC folder; the track number in the REC folder will start from "REC1" and
increase gradually.
- To play REC track in folder use PREV or NEXT button to select the directory REC, press "PLAY /
II " to start playing.
• • This function button particular for playing the first track in REC folder. When press "STOP" to finish recording, then press "REC/PLAY", REC PLAY
will play the last track in REC folder.
• Remote controller shall appoint to the receiving hole of faceplate.
• Battery installation of the remote controller
1. To open up the battery cover ( on the back side of the remote controller ), press down the cap and slide it from the left to the right, then to pull it out.
2. Place a new battery (battery type CR2025 3V, w/its positive upward)
3. Reverse the actions stated in the statement 1