![Fbt MA 6120T-6CD Owner'S Manual Download Page 7](http://html.mh-extra.com/html/fbt/ma-6120t-6cd/ma-6120t-6cd_owners-manual_547116007.webp)
1.
You can confirm the frequency of tuner
through this display.
2.
This button is used for selection
AM 1,2 or FM 1,2, or 3,
when using the tuner. (5 band 30 memory)
3.
These buttons select six memory address
banks for the storage of broad- casting
frequencies. Each of these banks can be
hold five broadcasting frequencies at
designated memory address areas,
i.e., F1, F2, F3, A1 and A2. Therefore a
total of thirty broadcasting frequencies can
be stored.
4.
When the button is momentarily pressed
once, the AM/FM frequency will adjust with
a single UP/DOWN count. When the button
is pressed continuously, the frequency is
continuously fast UP/DOWN counted.
5.
This is for memorizing the broadcasting
frequency.
1. Select the memory area AM or FM with
the BAND switch (2).
2. Select the frequency that you want to
memorize with the UP/DOWN switch (4).
3. Press the MEMORY switch (5), then
select the desired address with
ADDRESS switch (3).
4. The present status of the tuner will be
memorized in the selected address.
TUNING FREQUENCY DISPLAY
BAND SELECT BUTTON
ADDRESS SELECT BUTTON
UP/DOWN BUTTON
MEMORY BUTTON
5
SEZIONE TUNER
TUNER SECTION
1
2
3
4
5
FM/AM DIGITEL TUNER
PLL FREQUENCY SYNTHESIZER
MEMO 1
MEMO 2
MEMO 3
MEMO 4
MEMO 5
MEMO 6
MEMORY
DOWN
UP
BAND
2
2
2
2
2
2
2
1.
Visualizza la frequenza radio selezionata.
2.
Pulsante per la scelta della banda: AM 1,2
FM 1,2,3 (5 bande e 30 memorie).
3.
6 pulsanti di memoria, ognuno dei quali può
memorizzare fino a 5 stazioni radio
(AM - FM)
4.
Pulsanti per la regolazione delle frequenze;
premendo una sola volta la ricerca si
blocca ad ogni stazione trovata; tenendo
premuto il pulsante la ricerca è continua
e veloce.
5.
Pulsante per la memorizzazione di una
stazione radio.
1) selezionare l’area AM o FM con il
pulsante BAND (2)
2) selezionare la frequenza desiderata che
si vuole memorizzare con i pulsanti
DOWN/UP (4)
3) premere il pulsante MEMORY (5), quindi
selezionare uno dei 6 pulsanti MEMO (3)
dove si desidera memorizzare la
stazione prescelta
4) la presente configurazione verrà salvata
DISPLAY
BANDA
MEMO 1 - 6
UP/DOWN
MEMORY