- 20 -
Miscellaneous Commands (Cont’d)
ASSIGN USERS ACCESS TO OTHER PARTITIONS
You can assign users access to any of the partitions in a multi-partition
system by entering the following:
#
[7] [master code] [user number] [1, 2]
where 1, 2 are the partitions to which the user is authorized to access.
CHANGE PARTITION
To arm or disarm other partitions from your keypad, enter the following:
#
[0] [1-2, 0, 9]
where: 1-2* = the desired partition you wish to change to
0 = arms all partitions
9 = disarms all partitions
*When you enter a partition number (1 or 2), the system displays the current
armed state for that partition. You can then arm or disarm by entering the
arming/disarming command.
TO SET AUTO-ARM TIME
Auto-Arm Time lets you set the time your system automatically arms.
To set the Auto Arm Time, press:
#
[5] [4] [user code] [hour 00–23] [minute 00–59]
The keypad will prompt you for the required entries.
TO VIEW QUICK COMMAND LIST (LCD Keypads Only)
To view a display of available quick commands, press:
#
then [5] [0].
To step through the available quick commands, press # .
To exit the quick command list, press
✳
.
TO VIEW AUTO-ARM TIME (LCD Keypads Only)
To view the auto-arm time for the partition to which the keypad is assigned,
press:
#
then [5] [2] then user code with authority level 1 or 2.
AUTOARM TIME:
05:00PM
(The user code is not required if so programmed by installer.)