background image

flammable fluids, gasses or objects.
- Disconnect this device from the power supply if it will not be used for a longer period of 
time, if maintenance is necessary, or if the device needs to be cleaned.
- Do not pull on the cable to remove a connector, as it can cause damage.
- Do not use any cables other than the ones described in this manual. Do not use defective 
cables. Please contact your dealer if the included or necessary cables do not function 
properly with this device. 
- In the event that the device is exposed to extreme temperature changes (e.g. transported 
through a cold outside environment into a warm indoor environment), it should not be 
turned on until it has reached room temperature. This is necessary to prevent moisture from
forming in the device, which could lead to electric shocks.

Guidelines and operation of this device:

- This device is intended for adult use only.
- This device is not suitable for use by children, and should always be operated by an adult.
- This device may only be used in a suitable environment where no damage to the device 
can occur. Do not use the device in moist or dusty environments such as:

- indoor swimming pools where chlorine is used
- beaches where there is sand and salt
- outdoors
- indoors in spaces where intense heat sources are present, or where it reaches 

temperature levels that would be considered uncomfortable for a person
- Avoid impact and collisions during use and transport. Do not transport the device while it is
in use. Avoid using excessive force when installing and operating the device.
- The user should become familiar with the functions of this device before using it. 
- Should the device not be used in the manner described in this user manual, damages or 
even injuries could occur. Fazley cannot be held responsible for any injuries or damages 
that occur as a result of improper use of this product.

Storage and transport:

- This product is designed for mobile use. It can be transported separately as long as it’s 
well-protected against shocks and collisions.
- This device is not designed for permanent (24/7) use. The expected lifespan of the device 
will not be affected by occasionally turning the device off. Disconnect the device or turn off 
the power when it is not actively in use. 
- If the device will not be used for a longer period of time, it should be disconnected and 
stored in a dust-free environment. 
- Do not expose the device to extreme temperature differences.

Housing

- Inspect the device's housing frequently, and always just before use. Avoid operating the 

The information in this user manual is subject to change at any time without notice.

Version:
1.0

Date of creation and author's initials: 
08-03-2017 RV

Revision date and author's initials: -

Summary of Contents for PBP-07














Reviews: