this, when set to the right levels, can enhance sounds by giving them an extra dimension.
All of the possibilities can be cycled through by pressing the 'Function Menu' button multiple
times. When you've found the function you want to adjust, you can do so using the '+ or -'
buttons or the 'Data' knob. After the adjustment has been made or when no action has been
taken for 3 seconds, the Function Menu will close again.
Any values you set within the Function menu can be reset to their default values by
pressing the '+ and -' buttons at the same time. Any values you set will only be retained as
long as the keyboard is switched on. If the keyboard is switched off and on again, the
default values will be automatically restored.
An overview of the functions:
Metronome type
Beat: 0 - 9
Tune
-50 - +50
Reverb type
1 - 10
Reverb level
0 - 127
Chorus type
1 - 10
Chorus level
0 - 127
Mixer
The Mixer console function provides more possibilities to adjust the volume balance
between different sounds, in particular the sounds used for the accompaniment rhythms.
The harmonies could be made more or less prominent, for instance, as could the
percussion sounds. Settings can be adjusted using the '+ or -' keys, just like they are in the
Function Menu. The values are set to 28 by default, but can be adjusted anywhere between
0 and 32.
An overview of the possibilities:
Percussion backing track volume
(Rhythm_m)
0 - 32
Bass level
0 - 32
Harmony track1 volume (Chord 1)
0 - 32
Harmony track2 volume (Chord 2)
0 - 32
Harmony track3 volume (Chord 3)
0 - 32
Master voice track volume (Upper 1)
0 - 32
Dual Voice track volume (Upper 2)
0 - 32
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's initials:
25-02-2019RV
Revision date and author's initials: -
