3-5
Chapter 3: BIOS setup
[Auto]
Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
3.3.5
Hardware Monitor
This menu displays the system/CPU temperatures and power status.
3.3.6
SIO Configuration
The items in this menu allow you to configure Super IO settings.
[*Active*] Serial Port 1
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]
The following two items appear only when you set
Use this device
to
[Enabled].
Possible [Use Automatic Settings]
Allows you to select an optimal setting for Super I/O devices. Configuration
options: [Use Automatic Settings] [IO=3F8h; IRQ=4;] [IO=2F8h; IRQ=12]
Mode [RS232]
Allows you to select the Serial Port mode. Configuration options: [RS232]
[RS422] [RS485]
[*Active*] Serial Port 2
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]
Possible [Use Automatic Settings]
This item appears only when you set
Use this device
to [Enabled] and
allows you to select an optimal setting for Super I/O devices. Configuration
options: [Use Automatic Settings] [IO=2F8h; IRQ=12] [IO=3F8h; IRQ=4;]
[*Active*] Serial Port 3
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]
Summary of Contents for FAY-003
Page 1: ...Industrial Motherboard FAY 003 ...
Page 9: ...FAY 003 1 4 ...
Page 40: ...FAY 003 A 3 FAQs To be added in later versions ...
