Fayat Dynapac DFP7, Operating And Maintenance Instructions Manual

Page: 99 / 110

1. Mix fresh fuel with fuel stabilizer (follow the instructions of the
manufacturer).
2. Empty the fuel tank and fill it with the prepared fuel mix.
3. Start the engine and run the machine for approx. 10 minutes
in the open.
4. Park the machine in secured condition.
1. Close the fuel valve.
2. Disassemble the drain plug (3) and the seal (4) from the car-
burettor and collect leaking fuel.
3. Disassemble the filter bowl (2) and the O-ring (1).
4. Open the fuel valve and collect running out fuel.
5. Close the fuel valve.
6. Install the drain plug with the seal on the carburettor.
7. Assemble the filter bowl with the O-ring.
8. Dispose of fuel in line with environmental regulations.
Tool: n 13/16 inch spark plug spanner
1. Unscrew the spark plug using a 13/16 inch spark plug
spanner.
2. Fill in several drops of fresh engine oil through the ignition
plug opening.
Using fuel stabilizer
Emptying the fuel tank
B-HON-0036
Fig. 103
B-834-0045
1
2
3
4
Fig. 104
Protecting the cylinder
B-834-0029
Fig. 105
Maintenance – As required
DFP7 99