manualshive.com logo in svg

Fayat Group DYNAPAC DRP25D, Original Operating Instructions, Page: 72 / 118

Share
Download
Fayat Group DYNAPAC DRP25D Original Operating Instructions Download Page 72

The viscosity index must be at least 150 (observe information of

manufacturer).

8.3.4.2 

Bio-degradable hydraulic oil

The hydraulic system can also be operated with a synthetic ester

based biodegradable hydraulic oil.

The biodegradable hydraulic oil Panolin HLP Synth. 46 or

Plantohyd 46 S meets all the requirements of a mineral oil based

hydraulic oil according to DIN 51524.

In hydraulic systems filled with biodegradable hydraulic oil, always

use the same oil to top up and do not mix oil types.

When changing from mineral oil based hydraulic oil to an ester

based biologically degradable hydraulic oil, you should consult the

lubrication oil service of the oil manufacturer, or our customer

service for details.

NOTICE!
Danger of damage to the hydraulic system!

–

After the changeover check the hydraulic oil fil-

ters increasingly for contamination.

–

Have regular oil analyses performed regarding

the water content and mineral oil.

–

Replace the hydraulic oil filter at the latest after

500 operating hours.

Maintenance – Fuels and lubricants

 

DRP25D

 

72

Summary of Contents for DYNAPAC DRP25D























































































































Reviews:

No comments