Fayat Group DYNAPAC CA2500, Instruction Manual

Page: 117 / 176

Maintenance - Maintenance schedule
4812162601_G.pdf 2021-04-14
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
Before starting up for the first time on that day Before starting up for the first time on that day
14 Check the scraper setting 14 Check the scraper setting
Check for free circulation of cooling air Check for free circulation of cooling air
31 Check coolant level Refer to the engine manual 31 Check coolant level Refer to the engine manual
2 Check the engine oil level Refer to the engine manual 2 Check the engine oil level Refer to the engine manual
1 Refuel 1 Refuel
Fill the urea tank Fill the urea tank
6 Check fluid level in hydraulic reservoir 6 Check fluid level in hydraulic reservoir
Test the brakes Test the brakes
After the FIRST 50 hours of operation
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
8 Change the hydraulic fluid filter 8 Change the hydraulic fluid filter
12 Change the drum cartridge oil 12 Change the drum cartridge oil
20 Check the wheel-nuts are tightened 20 Check the wheel-nuts are tightened
21 Check the tire pressure 21 Check the tire pressure
13 Change the oil in the drum gearbox Only for machines with
drum gearbox. 13 Change the oil in the drum gearbox Only for machines with
drum gearbox.
17 Steering hitch - Tightening 17 Steering hitch - Tightening
Every 50 hours of operation (Weekly)
Refer to the contents to find the page number of the
sections referred to!
Pos.
in fig Action Comment Pos.
in fig Action Comment
Check that hoses and couplings are not leaking Check that hoses and couplings are not leaking
3 Draining the fuel prefilter Performed if the varning
symbol for water in fuel is
shown on the display. 3 Draining the fuel prefilter Performed if the varning
symbol for water in fuel is
shown on the display.
105