6.6 Maintenance every day
6.6.1 Cleaning the machine
NOTICE!
Perform cleaning work only after the engine has
cooled down and with the engine stopped.
Dirty operating conditions, particularly lubrication oil
and fuel deposits on the cooling fins of the engine and
the cooling air intake opening have an adverse effect
on the cooling of the engine.
You should therefore immediately seal any oil or fuel
leaks near fuel tank, cylinder or cooling air intake.
NOTICE!
Do not guide the water jet directly into air filter/carbu-
Fig. 33, starter/air intake (2) and the igni-
tion switch (3).
After wet cleaning run the engine warm to evaporate all water
residues and to avoid corrosion.
6.6.2 Check the engine oil level
NOTICE!
Park the machine on level ground so that the engine is
in horizontal position.
For quality and quantity of oil refer to the "table of fuels
and lubricants".
Fig. 33
Maintenance
BVP 10/36 / BVP 18/45
51
Go to
Discount-Equipment.com
to
order your parts
