Fayat Group BOMAG BRP 35/60 D Operating Instruction, Maintenance Instruction Download Page 67

Page: 67 / 111

8.4 List of fuels and lubricants

Assembly group

Fuel or lubricant

Filling quantity

Summer

Winter

Observe the level

mark!

Engine oil

SAE 10W-40

Specification:

Chapter 8.3.1 ‘Engine oil’ on page 66

0.9 l

(0.24 gal us)

SAE 15W-40

SAE 10W-30

SAE 30

SAE 10W

Fuel

Diesel

Winter diesel fuel

3.0 l

(0.8 gal us)

Specification:

Chapter 8.3.2 ‘Fuel’ on page 66

Exciter shaft housing

as engine oil

0.4 l

(0.11 gal us)

Steering rod

Hydraulic oil (ISO), HV 32

Specification:

Chapter 8.3.4 ‘Mineral oil based

hydraulic oil’ on page 67

0.4 l

(0.11 gal us)

Maintenance – List of fuels and lubricants

BPR 35/60 D

Discount-Equipment.com

order

your

parts

Summary of Contents for BOMAG BRP 35/60 D
















































































































Search results

Summary of Contents for BOMAG BRP 35/60 D

Reviews:

Brands by name

Popular brands

Fayat Group BOMAG BRP 35/60 D, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for BOMAG BRP 35/60 D

Reviews:

Brands by name

Popular brands