Favero Electronics PS-M Troubleshooting Manual Download Page 5

7.0  Electronic LED boards models and their position

7.2  Order of an electronic LED board
There are 2 ways to order 

:

1.  Specify only the article code, shown on paragraph 7.1.

In  this  case  you  need  a  soldering  iron,  in  order  to  carry  out 

 

, as specified on paragraph 7.3.

2.  T

 

 

number that defines the position of the 

:

-- Find the scoreboard model, among those shown in chapter 9.
-- Find the number indicated for the concerned electronic board.

For  example  concerning  the  PS-M  model,  to  order  the  LED  board  which  stays  in  the  position  of 

seconds units, you should specify:

   art. 0430-1262/PS-M/20

7.3   Electronic LED board position

he same model of electronic LED board can be used in different positions o

,  but  each  position  requires  a  different  setting,  realized  through 

  carried  out  with  a  soldering  iron.   

  the  figure  on  the 

right shows the position of the 

 on 2 models of electronic board.

The  chapter  9  shows  the  electronic  LED  boards  for  all  models  of  the  PS  series 
scoreboards. 
Please  look  at  the  model  you  are  interested  in  and  note  that 

has been indicated 

.

Moreover,  each  electronic  board  is  identified  by  a  number.    If  when  ordering  an 
electronic  LED  board  both  the  scoreboard  model  and  the  identification  number  of 
the 

, the  last  one  will  be  provided  with  the 

 already carried out (see paragraph 7.2).

an electronic LED board

the 

on  the  electronic 

board

ogether  with  the  article  code shown  on  paragraph  7.1,  specify  also  the  model  of  scoreboard  in

electronic board

T

n the 

same  scoreboard

For  example

the  position  of  the 

for each electronic board

electronic  board  have  been  specified  

solder  jumpers

 

which the electronic board will be installed and its position, definied by a number.  In this way,

solder jumpers 

 the 

electronic  board  comes  provided  with  the  solder  jumpers  already  carried  out.      To  identify  the

solder  jumpers

solder jumpers

solder 

jumpers

Art.0430-1266
FAV.A504 electronic board, digit ”1”,RED LEDs

Art.0430-1260
FAV.A504 

 ”8”, 

electronic board, digit

RED LEDs

Art.0430-1262
FAV.A504 

 digit ”8”, YELLOW LEDs

electronic board,

Art.0430-1264
FAV.A504 

, GREEN LEDs 

electronic board, digit ”8”

Art.0430-1300
FAV.A508 

, 2-points, 

electronic board

RED LEDs

Art.0430-1302
FAV.A508 

 

electronic board, 2-points YELLOW LEDs

7.1  Article codes of the electronic LED boards

:

The different models of electronic LED boards on the PS scoreboards, are identified through the following articles

Pag.5

Summary of Contents for PS-M











Reviews: