3.
DAILY USE
3.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or
burners, gentle frying.
While boiling and frying big quantities of food without a lid, cook‐
ing on multiple cooking zones or burners.
While boiling and frying big quantities of food without a lid, big
humidity.
Refreshes the air in kitchen after cooking at a very low noise lev‐
el. It can be activated and de-activated by touching the symbol.
The function turns off automatically after 60 minutes. Use after
cooking only.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
The control Panel is a sensor field.
Touch the symbols for 1 second to
activate the functions.
To operate the hood:
1.
Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2.
To activate the function touch the symbol.
3.
If needed, touch the light symbol to
illuminate the cooking surface.
To turn off the appliance press the symbol
again.
3.2 Hob to Hood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
For more information how to use the
function refer to the hob user manual.
3.3 Activating Maximum Motor
Speed
When you press the button , the Maximum
Motor Speed starts to operate for 8 minutes.
After that time, the appliance returns to its
previous speed settings.
When the function is turned on,
additional touch on the button does
not have any effects.
3.4 Activating and deactivating
the filter notification
Filter alarm reminds to change or clean the
charcoal filter and clean the grease filter. The
filter indicator is turned on (white) for 30
seconds if the grease filter must be cleaned.
The filter indicator flashes (white) for 30
seconds if the charcoal filter must be
replaced or cleaned.
ENGLISH 23
