FAURE FDF516, User Manual, Page: 14 / 20

These data are necessary to help you quickly and cor-
rectly:
• Model (Mod.)
• Product number (PNC)
• Serial number (S.N.) For these data, refer to the rating plate.
Write the necessary data here:
Model description : ..........
Product number : ..........
Serial number : ..........
The cleaning results are not satisfactory
The dishes are not clean • The selected washing programme is not applicable for the type of load
and soil.
• The baskets are loaded incorrectly so that water cannot reach all surfaces.
• Spray arms do not turn freely because of incorrect arrangement of the
load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.
Limescales particles on the
dishes • The salt container is empty.
• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.
The dishes are wet and dull • No rinse aid has been used.
• The rinse aid dispenser is empty.
There are streaks, milky spots or
a bluish coating on glasses and
dishes • Decrease the rinse aid dosage.
Dry water drop signs on glasses
and dishes • Increase rinse aid dosage.
• The detergent can be the cause.
Technical data
Dimensions Width
Height
Depth 60 cm
85 cm
61 cm
Electrical connection - Voltage -
Overall power - Fuse Information on the electrical connection is given on the rating plate on the
inner edge of the dishwasher door.
Water supply pressure Minimum
Maximum 0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
Capacity 12 place settings
Installation
Warning! Make sure that mains plug is
disconnected from the mains socket during
installation.
Fitting under a counter
Put the appliance adjacent to a water tap and a water
drain. Remove the appliance worktop to install it under
a sink unit or a kitchen worktop. Make sure that the
14