manualshive.com logo in svg

Faun C40 Trackway, User Manual

Share
Download
Faun C40 Trackway User Manual Download Page 15

15

5670480 (FTW-5670480 - 4.0) Boat Ramp Kit 

 

Copyright © FAUN Trackway Limited  

5. OPERA

TION

5.6  Recovery

C40 / C90 Trackway

®

 Boat Ramp is recovered by attaching the Parbuckling Strap to a vehicle and 

driving in a slow and controlled manner.

Attach the Parbuckling Strap to a centre tow point on the vehicle.

Ensure that the other end of the Parbuckling Strap is anchored to the far end of the C40 / C90 
Trackway

®

 Boat Ramp with a Ground Anchor Stake.

Position the vehicle on the C40 / C90 Trackway

®

 Boat Ramp, facing the direction of travel. Align 

the vehicle parallel to the C40 / C90 Trackway

®

 Boat Ramp, drive off slowly and only steer to 

correct the roll formation.

Fig. 5-6 Parbuckling the C40 / C90 Trackway

®

 Boat Ramp

Continue parbuckling until the C40 / C90 Trackway

®

 Boat Ramp is completely rolled and finish 

the run by placing the roll of C40 / C90 Trackway

®

 Boat Ramp on dunnage where possible.

Insert chocks under the C40 / C90 Trackway

®

 Boat Ramp to prevent movement.

Store with the Parbuckling Strap.

Attach Transit Straps to the C40 / C90 Trackway

®

 Boat Ramp.

Summary of Contents for C40 Trackway











































Reviews:

No comments

Brands by name

Popular brands

Load more brands