Manual
SLUGGUARD®
Manual SLUGGUARD® Revision 6
4
5. Installation, Commissioning and Operation
For cabling and mechanical setup of the SLUGGUARD
®
please refer to the training documents (Certified Installer
Training).
Before commissioning of the entire measuring point, check that all connections are installed correctly. Ensure that
electrical cables are not damaged. Do not operate damaged products and secure them against unintentional
commissioning. Mark the damaged product as being defective.
Measuring point faults may only be rectified by authorised and specially trained personnel. If faults cannot be
rectified, the products must be taken out of service and secured against unintentional commissioning.
Repairs may only be carried out by manufacturer or by a designated service organisation.
5.1 Return
If the device requires repair, please send it in cleaned condition to the appropriate sales centre. Please use the
original packaging, if possible.
When sending for repair, please enclose a note with a description of the error and the application.
Please enclose the certificate of decontamination (to be found on the download section of FAUDI-Aviation-Sensor
homepage.
5.2 Contact
Contact address of manufacturer:
FAUDI Aviation GmbH
Scharnhorststraße 7B
D-35260 Stadtallendorf
Tel.:
+49 (6428) 44 652 570
Fax:
+49 (6428) 44 652 223
Email:
Web:
www.faudi-aviation.com
