6. Parameter Setting Under start-up state, long press UP and DOWN button, the system enters parameter
setting state; in this condition, the LCD parameters can be set. Again long press UP and DOWN button, it
will be out of setting state or quits automatically without operation for 10 seconds.
Under parameters settings, press UP/DOWN button to adjust values, press POWER button to switch item,
and save last item parameter value.
a)
Backlight Brightness: Display P01, press UP/DOWN button, it will display 1~3, while 1 represents
the darkest, 3 represents the brightest.
b)
Metric System/British System: Display P02, press UP/DOWN button to switch km/h or MPH display,
set metric system/British system.
c)
P03 – DO NOT ADJUST
d)
Automatic Shutdown Time: Display P04. Press UP/DOWN button, it will display 0~60
representing shutdown minutes, while 0 means no automatic shutdown.
e)
Assistance Gear – P05 Adjust number of gears your pedal assist will shift up to. 0= 3 modes
(eco/std/power), 1=5 modes (standard/default setting), 2=9 modes (3 eco/ 3 std/ 3 power)
f)
P06/P07 - DO NOT ADJUST
g)
Rate-limiting Adjust: Display P08. The speed position display rate-limiting value, default is 25km/h.
Press UP/DOWN button to adjust rate-limiting value. The slowest is 10 km/h, while the fastest is
41km/h.
h)
Accumulative Mileage Reset: Display P16. The speed position displays present accumulative
mileage. Long press the UP button (5 seconds), when the speed position display 0, the
accumulative mileage is reset.
i)
Display P18. Long press the UP button (5 seconds), when the speed position displays SSSS, restores
default setting.
