The charger will automatically stop charging when the battery is fully
charged. Do not leave plugged in while unattended.
DO NOT LEAVE BATTERY ATTACHED TO CHARGER WHEN
CHARGER IS NOT PLUGGED IN.
Headset battery fits into strap. There is a “pocket”sewn into the strap on
the right side (next to power in). Stretch the strap and battery will be held
in place by the elastic properties of the strap.
Choosing the Best Channel
For best performance, select a channel that has the least amount of
interference.
While the transmitter is turned OFF, Turn on the video headset and look at
the screen as you check each channel. Clear channels will have a
consistent static background. Channels with interference will have
horizontal static lines.
Once you have chosen the clearest channel on the headset, set the
transmitter to the same channel.
Contents Checklist:
-
RCV922 Video Headset
-
Fat Shark headset storage bag
-
Transmitter
-
TX cable (2p Molex power, 5p Molex camera)
-
7.4V 900mAh LiPo battery pack
-
8.4V LiPo battery charger
-
3dBi headset antenna
-
Earphones with adjustable volume control
-
Operator manual
-
120 cm AV cable male RCA
-
Extra fitting foam
5.8Ghz 100mW TX
·
Transmitting power: 100mW
·
Current consumption: 250mA
·
Supply voltage:
6-12V DC
·
Transmit distance: 300m line
of sight (no interference)
·
Channels: 7, synchronization of
stereo audio and video
·
Transmitting frequency: 5.8Ghz,
·
FM Audio/Video Modulation
·
CH1: 5740Mhz, CH2: 5760Mhz,
CH3: 5780Mhz, CH4: 5800Mhz
CH5: 5820Mhz, CH6: 5840Mhz
CH7: 5860Mhz
2.4Ghz 10mW Transmitter
·
Transmitting power: 10mW
·
Current consumption: 50mA
·
Supply Voltage:
6-12V DC
·
Transmit distance: 300m line
of sight (no interference)
·
Channels: 4, synchronization of
stereo audio and video
·
Transmitting frequency: 2.4Ghz,
·
FM Audio/Video Modulation
·
CH1: 2414Mhz, CH2: 2432Mhz,
CH3: 2450Mhz, CH4: 2468Mhz
10
FatShark Wireless
3
FatShark Wireless
