6
iTube 302 Valve Amplifier
• Power switch
Press to on for power - the
indicator will light up while
the power is on. Later on, try
pressing it off to give it a rest.
• Source
For switching between
different sound sources
- FatDock Blu, cd player, pre-
amp, whatever.
• Volume control
Full control - you can turn it
up… or you can turn it down.
The Front
Note:
Before you switch on, set the volume control to the lowest
setting to avoid damage to the speakers. Just in case you don’t, the
speaker-protection circuit will mute the volume for a few seconds
after the power is switched on.
Speaker Outputs
Speaker Outputs
AC Power
Input
Power Switch
Volume
Source
Auxiliary
Input
Sub
Output
5 MINUTE RULE!
Your iTube 302
should only
be re-started 5
minutes after
switching off to
avoid damaging
the tubes.
The Back
USB DAC
Line Inputs
Red is right channel,
White is left channel
