rockcoco assembly manual
INSTRUCTIONS FOR USE AND MAINTENANC
E
Use
• Choose and mount the powercable of your preference.
• Hang the lamp on a suitable and stabile branch or ceiling.
• Check the voltage of your power supply. The voltage must be between 100-240VAC.
• To switch On, press the “+” button shortly. To switch Off, press the“–“ button on the remote control shortly.
• The brightness can be regulated by pressing and hold the “+” or “–“ button.
• This lamp is a Class II device. An earthed power socket is not required.
• To pair the remote with the Rockcoco you must remove the cover from the adapter.
Push the switch (LED lights up). Push “+” button on the remote (LED flashes). Pairing is succeded.
Maintenance
• Replace the battery (alkaline 27A 12V) of the remote control, when the controls becomes unresponsive. Unscrew and open the bottom of the remote control.
Slide out the cell battery from its compartment carefully and replace with a new one.
Cleaning
• Use a soft cloth, lukewarm water and soft soap.
• Do not use cleaning agents containing ammonia, benzene or abrasive surfaces.
• Never open the various components of the lamp when cleaning.
• Do not spray with a pressure washer
TROUBLE SHOOTING
The lamp does not work
• Check the connection between the cable and the adapter.
• Replace the battery of the remote control.
• Pair the remote control.
• Please contact your Fatboy dealer if the problem persists.
WARNING! NEVER OPEN THE LAMP OR THE ADAPTER AND NEVER ATTEMPT TO REPAIR THE LAMP YOURSELF.
If the cable is damaged contact your Fatboy dealer to replace the cable.
The lamp has fallen and is damaged
• If the lamp no longer works it is unsuitable for use. In that case please contact your Fatboy dealer.
IMPORTANT!
Please contact Fatboy or your Fatboy dealer if your problem has not been solved or you have any other problems.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 21
15/12/14 10:35
