Fatal1ty F-I90HD User Manual Download Page 52

Page: 52 / 88

3-2

F-I90HD

3.2 ATi South Bridge Driver

This program enables the chipset function.

※

Please install this driver first after having installed the Windows operating
system.

To install this program:

Click on the [

Drivers

] tab in the

installation menu screen.

Click the [

ATi South Bridge Driver

]

item. The installation screen appears.

Follow the prompts on the screen to
complete installation.

3.3 Microsoft.NET Framework

This program enables the amendment for ATi Catalyst.

※

Please install this driver first before installing the ATi VGA driver.

To install this program:

Click on the [

Drivers

] tab in the

installation menu screen.

Click the [

Microsoft.NET

Framework

] item. The installation

screen appears.

Follow the prompts on the screen to

complete installation.

Summary of Contents for F-I90HD

























































































Search results

Summary of Contents for F-I90HD

Reviews:

Related manuals for F-I90HD

Brands by name

Popular brands

Fatal1ty F-I90HD, User Manual

Search results

Summary of Contents for F-I90HD

Reviews:

Related manuals for F-I90HD

Brands by name

Popular brands