Fat Shark
RC Vision Systems
8
AV in/out Port
RCA Connector:
Yellow: Video, White: Audio Left,
Red: Audio Right
Recording Video
Connect AV cable to AV out port on right side of headset. Connect recording
device to cables and set up as per manufacturer directions.
Note: Cables pins are not all the same (see above chart), be sure to connect to
headset using the included cable.
Using an external receiver:
Use the AV cable to connect headset to
the RCA AV port of external devices.
To share the base station power supply
with your goggles, pick up a 3m Dominator
AV cable accessory from your retailer.
Note; internal receiver must be shut off to
properly display external AV.
Battery Charging
The 1000 mAh 7.4 V lithium polymer
batery pack is equipped with a 3 pole
balance charger lead that allows the
battery to be charged off standard RC battery pack chargers (not included). Follow
your charger instructions for setting up for 760 mA, 7.4 V Li-Po. Some chargers
require the discharge cable to be connected. Use the enclosed discharge lead
adapter for these types of chargers.
