Fat Shark 11
RC Vision Systems
HD Input:
The HD port can be connected to HDMI devices via the high definition
media mini port. Recommend to first connect to the HDMI device then
apply the power from the battery (allow the HDMI device to initiate using
power supplied through the cable by the host device before powering
goggles). Disconnect power when switching between devices to clear the
settings.
Note: Most HD connectivity issues are due to either incorrect monitor
settings or faulty cable. Before assuming the HD port is defective, try with
alternative HDMI sources and alternative cables. HDMI cables may
fracture over time at connector flex points.
Diversity Receiver:
The diversity receiver has two SMA connectors marked Primary and
Secondary. The purpose of diversity receiver is to combine coverage of a
direction and omni antenna. If using with a single antenna (omni or
directional), place on Primary SMA only. If using with a directional AND
an omni, place the omni on Secondary SMA and the directional on Primary
SMA.
18650 Battery Holder (batteries not included):
The Fat Shark 18650 Battery Holder is compatible with commonly available
18650 style Li-Ion packs to provide a huge capacity power supply. The
holder has a row of stylish blue LED indicators to indicate remaining
capacity (4 levels) to prevent a sudden power/vision lost. It seats securely
in the headset strap pocket on back. Batteries must be removed from
holder and charged via external charging (charger and batteries not
included).
Specification (FSV1101 Monitor):
Electrical
Receiver: 4 Bands, 32 Channels, 5G8Antenna diversity receiver
Channel CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
Fat Shark: 5740 5760 5780 5800 5820 5840 5860 5880 Mhz
Race Band: 5658 5695 5732 5769 5806 5843 5880 5917 Mhz
Band A:
5865 5845 5825 5805 5785 5765 5745 5725 Mhz
Band E:
5705 5685 5665 5645 5885 5905 5925 5945 Mhz
Working Voltage: DC input 7- 13V
Channel: selected by buttons (up/down)
