Press the cloth firmly against the slate along the curve of all pockets. Trim off excess cloth with scissors or
box cutter.
Locate the 18 holes for the rail bolts along the perimeter of the tabletop. Carefully punch holes in the cloth.
Using a Philips screwdriver, run the shaft of the screwdriver around the sharp edge of the holes
in the slate. This gives the perfect hole. Be careful not to punch through slate screw holes.
Step 7: Attaching the Apron
With the help of another person, place (#35) apron section on side of table, making sure the apron is
centered to slate. Fix to base with 4 (#12) flat head screws. Repeat process for other apron sections.
Slide the (#37) apron corner onto each side of the (#36) end apron and fasten with 8 (#13) screws. Place
the end apron onto the table and secure the apron corner to the (#35) side apron with 4 (#13) screws.
Fasten the end aprons and side aprons to the table with 4 (#12) flat head screws. Repeat for other half.
13
37
37
12
12
36
36
37
13
12
12
12
12
12
12
35
37
★
PRO TIP
★
8
