VIM552 Graphics Processor Module
Specifications
V I M 5 5 2 U s e r M a n u a l
© 2 0 1 5 F a s t w e l V e r . 1 . 4
18
3. TECHNICAL CHARACTERISTICS
3.1. POWER SUPPLY
The board is supplied with a voltage of +12V. Electric power supply of the module must meet
the requirements cited in the table below.
Voltage
(V)
Minimum (V)
Maximum
(V)
Consumption current
(A)
+12 В
11.4
12.6
0.4
To provide the v5 V for SATA and USB, use the pulse converter from +12 V to +5 V with a
design efficiency of 85%. The current in the SATA power supply circuit is limited to 1
А, USB – to
0.5 A.
3.2. SOFTWARE REQUIREMENTS
The device is compatible with the following OS:
Windows XP (Embedded)
Windows 7
Linux 2.6
Drivers for Windows XP (in binary form) and for Linux (with source code) are provided by the
manufacturer of SM750 - Silicon Motion company.
3.3. OPERATING CONDITIONS
The module must be used under the following operating conditions:
-Operating temperature range:
Industrial: -
40° С to + 85° С
-Relative air humidity:
5 to 95 % at + 25° С (noncondensing);
-Use of
\COATED
option for increased humidity environment.
3.4. MECHANICAL CHARACTERISTICS
Vibration resistance for frequencies from 10 to 50 Hz
– amplitude 0,5 mm
Vibration resistance for frequencies from 50 to 500 Hz acceleration
– 5 g;
Resistance to single shocks, peak acceleration
– 100 g;
Resistance to multiple shocks, peak acceleration
– 50 g.
NOTE: MECHANICAL CHARACTERISTICS DO NOT APPLY TO REMOVABLE CONNECTIONS.
UNDER SEVER OPERATING CONDITIONS AND RESONANCE PHENOMENA, THE REMOVABLE
CONNECTIONS SHOULD BE ADJUSTED.
RESONANCE PHENOMENA ASSOCIATED WITH THE CRATE ELEMENTS FIXING RIGIDITY AT
FREQUENCIES 100-300 HZ WITH A 5 TIME INCREASE IN THE ACCELERATION RATE.
