User Manual
AIC 324
After installing the system driver, you need to set the module resources (base address and
interrupt number) in accordance with the jumper configuration using the standard Device Manager
program.
After unpacking the archive, copy to the target system the executable file "aicfw" and the "xsvf" -
file for updating the firmware of the module corresponding to the operating system, run the system
command interpreter, change the current directory to the directory with the executable file, then
execute the command with the admin account rights:
./aicfw -p 0x <module base address> <path to the xsvf-file of the firmware>, or
aicfw.exe -p 0x <base address of the module> <path to the xsvf-file of the firmware>
After the upgrade process is completed, you must restart the module by removing the power
supply.
2.2 USE OF THE MODULE
During operation, the module is automatically configured and does not require any adjustments
and software settings.
3 MAINTENANCE
The module does not require maintenance for the entire service life.
4 REPAIRS
The module should be repaired only in the Service Centers of the manufacturer or in the authorized
Service Centers of FASTWEL
®.
The main provisions and the grounds for carrying out repairs are set out in Section 8 of the User
Manual.
ATTENTION: ANY INDEPENDENT REPAIRS ON THE MODULE BY USERS IS PROHIBITED!
5 STORAGE
5.1 STORAGE CONDITIONS
Module
’s storage conditions 1 is in accordance with the GOST 15150-69.
