● Specifications and equipment are subject to change without
any obligations on the part of manufacture.
● For more information, questions and comments regarding
products, please contact us below.
Attention: Not to be Used for Personnel Protection.
Never use these products as sensing devices for personnel protection. Doing
so could lead to serious injury or death. These sensors do not include the
self-checking redundant circuitry necessary to allow their use in personnel
safety applications. A sensor failure or malfunction can cause either an ener-
gized or de-energized sensor output condition.
Please consult our distributors about safety products which meet OSHA,
ANSI and IEC standards for personnel protection.
600-8815 Kyoto, Shimogyo, Awata Chudoji 91, Japan
TEL : +81-(0)75-325-2920
FAX: +81-(0)75-325-2921
Website : http://www.optex-fa.com
Extension mode
You can get to [Extension mode] from [2:Extension mode] in [Setup mode]. (* means default value)
Teaching mode
BGS-HL series has 3 Teaching mode.
Please choose a Teaching mode at [Teach mode
tch
] in [Setup mode] before Teaching.
Output polarity can be reversed by [Light ON/Dark ON
Ldon
].
Following output shows its ON/OFF status as [Light ON
L on
].
● 1 point Teaching
Teaching is done at a position on the object to detect. When the distance is closer than that position,
the output will be ON.
● 2 point Teaching
Teaching is done at two different positions on the object to detect. Teach position will be set at center
of these two positions. When the distance is closer than the Teach position, the output will be ON.
When the distance between these two positions is too close, the display will show
Err
that means
error. Then, please try again.
● ZONE Teaching
Teaching is done without object to detect. Teach position will be set at this position. When the distance
between the object and Teach position gets bigger than the distance set at [ZONE distance
toL
] in
[Setup mode], the output will be ON.
Setup mode
You can get to [Setup mode] by clicking "SET" button from [RUN mode]. (* means default value)
Miscellaneous function
:KLOHLWV581PRGHSUHVVDWDWLPHIRUVHFRQG
7KHQZLOOEHVKRZQ
:KLOH.H\ORFNLVDFWLYDWHGDQ\DFFHVVH[FHSW5HOHDVH.H\
ORFNZLOOEHQHJOHFWHG
ٹ .H\ORFNIXQFWLRQ
ٴ $FWLYDWH.H\ORFN
:KLOH.H\ORFNLVDFWLYDWHGLWZLOOEHUHOHDVHGE\SUHVVLQJ
DWDWLPHIRUVHFRQGV7KHQZLOOEHVKRZQ
$IWHUWKLVSURFHVVHYHU\DFFHVVZLOOEHDFFHSWHG
ٴ 5HOHDVH.H\ORFN
䠉
䠇
䠉
䠇
Loc
uLoc
7($&+
581
hYSt
㻻㻺
㻻㻲㻲
㼠㼔㼞㼑㼟㼔㼔㼛㼘㼐
㼀㼑㼍㼏㼔
㼜㼛㼟㼕㼠㼕㼛㼚
㻿㼑㼚㼟㼕㼚㼓㻌㼞㼍㼚㼓㼑
hYSt
㻻㻺
㻻㻲㻲
㼀㼑㼍㼏㼔
㼜㼛㼟㼕㼠㼕㼛㼚㻌㻞
㼀㼑㼍㼏㼔
㼜㼛㼟㼕㼠㼕㼛㼚㻌㻝
㼠㼔㼞㼑㼟㼔㼔㼛㼘㼐
㻻㻺
㻻㻲㻲
toL
㼀㼑㼍㼏㼔
㼜㼛㼟㼕㼠㼕㼛㼚
㼠㼔㼞㼑㼟㼔㼔㼛㼘㼐
■ Cable type with standard bracket BGS-HL-B
■ Connector type with standard bracket BGS-HL-A
ij
4.5 4core 2m Cable
M8 4pin
Connector
Emitter axis
Emitter axis
1Pt
Press the [TEACH/RUN] button until the display shows “1pt”.
Teaching is completed after releasing button.
When the distance is closer than the
Teach position in Sensing range, the
output will be ON.
7($&+
581
1Pt
7($&+
581
2Pt
0.123
2Pt
Press the [TEACH/RUN] button until the display
shows “1pt”. Then, the display shows “2pt“ and
the distance related number alternately.
Click the [TEACH/RUN] button without
object to detect. Then, the display shows
“2pt“ that means Teaching is completed.
When the distance is closer than the
Teach position in Sensing range, the
output will be ON.
7($&+
581
1Pt
Press the [TEACH/RUN] button until the display shows “1pt”.
Teaching is completed after releasing button.
When the distance between the
object and Teach position gets big-
ger than the distance set at [ZONE
distance
toL
], the output will be
ON.
SEns
䠉
䠇
ٹ6HQVLWLYLW\
Auto
N__6
ع
N__1
n_P
ٹ131313VHOHFWLRQ
nPn
PnP
䠉
䠇
500
1000
2000
4000
Auto
¡VؙقN+]
¡VؙقN+]
¡Vؙق+]ك
¡Vؙق+] ك
$872
rESt
䠉
䠇
ٹ5HVHW,QLWLDOL]LQJ
YES
no
㻿㻱㼀
diSP
䠉
䠇
on
oFF
ٹ'LVSOD\VHWWLQJ
㻿㻱㼀
hYSt
䠉
䠇
0.123
6HWWKHYDOXH
㻿㻱㼀
ٹ+\VWHUHVLV
'HIDXOW
ؙؙؙ%*6+/ٸٸؙ
ؙؙؙ%*6+/ٸٸؙ
SANP
䠉
䠇
ٹ6DPSOLQJSHULRG
㻿㻱㼀
'HIDXOW
¡
V%*6+/
¡
V%*6+/
$XWR7KHVHQVRURSWLPL]HVDPSOLQJSHULRGDXWRPDWLFDOO\
㻿㻱㼀
㻿㻱㼀
thrE
䠉
䠇
bASE
㻿㻱㼀
P400
P200
P100
6HWWKUHVKROGOHYHOWRGHWHFWULVLQJSDUWDQGIDOOLQJSDUWRIOLJKW
VWUHQJWKZDYH<RXFDQFKDQJHWKHWKUHVKROGOHYHOHVSHFLDOO\
ZKHQWKHVHQVRUUHFHLYHVH[WHUQDOOLJKWDVQRLVHVRWRJHW
VWDEOHGHWHFWLRQ
%DVLFDOO\\RXGRQWKDYHWRFKDQJHWKHWKUHVKROG
ٹ7UHVKROG
AUG
1
8
䠉
䠇
ٹ$YHUDJLQJ
64
㻿㻱㼀
512
ShiF
䠉
䠇
ٹ6KLIWIXQFWLRQ
on
oFF
$FWLYDWHق6HWWHDFKSRVLWLRQDVك
1RWXVH
㻿㻱㼀
ٹ'LVSOD\VHWWLQJ/RRS
ٮ
ٮ
ٮ
ٮ
ٮ
ٮ
ٮ
ٮ
6HWWKHGLVSOD\DWWKH7HDFKSRVLWLRQWKUHVKROGZKHQ
7HDFKLQJLVGRQH:KHQLWVSRLQW7HDFKLQJVHWWKHGLVSOD\
DWQHDUVLGHSRVLWLRQRISRVLWLRQVRI7HDFKLQJ
$FWLYDWHWKHGLVSOD\
'LVDEOHWKHGLVSOD\ZKLOH.H\ORFN
,QLWLDOL]HWKHSDUDPHWHUVWRGHIDXOWVHWWLQJ
'RQRWKLQJ
6HWLQSXWRXWSXWDV131
6HWLQSXWRXWSXWDV313
7KLVSDUDPHWHUZRQWEHFKDQJHGE\>5HVHW
@
2QFH
WLPHV
WLPHV
WLPHV
%DVH؟6HWWKUHVKROGWRORZHVWOHYHO
3؟6HWWKUHVKROGWRXSSHUOHYHO
3؟6HWWKUHVKROGWRPLGGOHOHYHO
3؟6HWWKUHVKROGWRORZHUOHYHO
$XWR
؟$GMXVWVHQVLWLYLW\DXWRPDWLFDOO\
؟0D[LPXPVHQVLWLYLW\
؟0LQLPXPVHQVLWLYLW\
([DPSOHRISRLQW7HDFKLQJ%*6+/
6HQVLQJUDQJH
200.0
0.0
-35.00
000.0
165.0
$IWHU
7HDFKLQJ
,QLWLDOL]LQJZLOOEHGRQHZKHQWKHPRGHJHWVWR581PRGH
%HIRUH
7HDFKLQJ
7HDFK
SRVLWLRQ
NEnu
tch
Ldon
dELy
tiNE
䠉
䠇
䠉
䠇
䠉
䠇
䠉
䠇
1Pt
ZonE
2Pt
㻿㻱㼀
ڭSRLQWWHDFKLQJ
=21(WHDFKLQJ
ڮSRLQWWHDFKLQJ
0000
㻿㻱㼀
7R([WHQVLRQPRGH
ٹ([WHQVLRQPRGH
ٹ7HDFKLQJPRGH
ٹ/LJKW21'DUN21VHOHFWLRQ
ٹ2XWSXWGHOD\
ٹ'HOD\WLPH
䠉
䠇
off
ofdy
ondy
2))'LVDEOHRXWSXWGHOD\
2IIGHOD\
2QGHOD\
inP
䠉
䠇
ٹ([WHUQDOLQSXW
oFF
LSr
tch
S h
onE
L on
D on
/LJKW21:KHQWKHGLVWDQFHLVFORVHUWKDQ
7KUHVKROGWKHRXWSXWZLOOEH21=21(7HDFK
PRGH:KHQWKHGLVWDQFHLVRXWVLGHRI=21(
GLVWDQFHWKHRXWSXWZLOOEH21
:KLOHLWVRXWRIUDQJHWKHRXWSXWZLOOEH2))
toL
0.123
ٹ=21(GLVWDQFH
䠉
䠇
'HIDXOW
ؙؙؙ%*6+/ٸٸؙ
ؙؙؙ%*6+/ٸٸؙ
㻿㻱㼀
㻿㻱㼀
㻿㻱㼀
㻿㻱㼀
㻿㻱㼀
shot
2QHVKRW
ٮ
ٮ
ٮ
ٮ
7HDFKLQJ6HWFXUUHQWYDOXHDVWKUHVKROG
6DPSOHKROG.HHSWKHOHYHOZKHQLQSXWLV21
2QHVROGWKHYDOXHDVLQSXWWXUQV21
2))'LVDEOHH[WHUQDOLQSXW
/DVHU2)).LOOODVHUSRZHUZKHQLQSXWLV21
6HWWKHYDOXH
ٹ7HDFKLQJPRGH/RRS
6HWWKHYDOXHXQLWPV
off
ofdy
ondy
shot
21
2))
21
2))
tiNE
tiNE
21
2))
21
2))
tiNE
+RZHDFKPRGHZRUNV
'DUN21:KHQWKHGLVWDQFHLVIDUWKHUWKDQ
7KUHVKROGWKHRXWSXWZLOOEH21=21(7HDFK
PRGH:KHQWKHGLVWDQFHLVLQVLGHRI=21(
GLVWDQFHWKHRXWSXWZLOOEH21
:KLOHLWVRXWRIUDQJHWKHRXWSXWZLOOEH21
Dimensions with bracket
[mm]
Ramco Innovations www.optex-ramco.com Got Questions? 1-800-280-6933