5
www.fastTT.bike
FastTT Universal Mounting System Installation Guide
The tall stack bridge has a top and bottom side. It should always be installed with the side
marked ‘UP’ facing up, and the ARROW facing forward.
The bridge has a small lip along the front edge. This is to position FastTT spacers and angled
posts correctly. When you install our angled posts and position them against this lip they are
unable to slide forward, irrespective of the hole centre-to-centre requirements as detailed in
the previous section.
There is a cutaway at the rear of the bridge for your shifter cable to fit flush against when using
our spacers and angled posts.
