Fasttel WIZARD ELEGANCE IP, Instruction Manual

Page: 17 / 18

Editie 2.2 pg17
If the Ip Wizard is equipped with a camera, it can be accessed by browsing to
http://IPADDRESS:8080/?action=stream.jpg where IPADDRESS is its IP address in the network.
If you want a snapshot, the link is http://IPADDRESS:8080/?action=snapshot.jpg
You can protect this link from unauthorized persons by entering a user and password here.
An rtsp string is also available:
rtsp://IPADDESS:8554/camera
You can also adjust the proportions of the camera here.
Attention: either MJPEG rescaling or RTSP. Both at the same time is not possible.
Camera lighting: this value determines the strength of the LEDs that illuminate the visitor.
3.13 Camera settings:
Can only be used when the ambient lighting deviates significantly from normal. After experimenting,
you can use the default button to return to the default values.
3.14 Backup, recovery and logs
With
download configuration you can take a backup of the entire configuration.
When uploading, you can search for and upload a backup.
Factory reset : Device goes back to factory settings.
Attention: when you do a factory reset, the device starts up with ip address 192.168.222.123!
You can also always push the reset button that is located to the left of the black connector with a pen
for 5 seconds. After the second beep, the door phone will do a factory reset.
Logs : this is rather intended for any fault diagnosis by the manufacturer.