Bronze 1.4
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email: [email protected]
Web : WWW.FASTTEL.COM
5
You can adjust the loudspeaker sensitivity by means of your telephone. This is practical
when you live in a busy street, or when the Wizard is used in noisy environments.
How ?
Setting of loudspeaker level during conversation. Max. 16 steps (- 53 dB)
Code
#
1
Each time you enter this code, you raise the level
Code
#
2
Each time you enter this code, you lower the level
Attention: After the communication the defaults are automatically restored.
4. Forced micro
You can force the Wizard by setting only the micro to maximum sensitivity.
The loudspeaker of the door station is automatically put on the lowest volume level.
The microphone of the door station gets priority.
How ?
During the conversation, you enter code
#
6
.
5. Forced loudspeaker
Similar to the microphone, you can also force the loudspeaker.
The micro of the door station is switched to the lowest sensitivity.
The micro of the telephone thus gets priority.
How ?
During the conversation, you enter code
#
4
.
6. Standard value sound levels
This way, you reset the default (installation) sound levels.
This code resets the micro and loudspeaker level to default settings.(consult Setting micro
and loudspeaker level : code 88xx)
How ?
During the conversation, you enter code
#
5
.
7. Mute
During the conversation, you can switch the microphone of the door station on or off.
Bronze 1.4
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email: [email protected]
Web : WWW.FASTTEL.COM
6
In very noisy situations (eg. Petrol stations) it can be necessary to temporarely switch the
microphone of the door station on or off.
How ?
During the conversation, you enter the correct code.
Code
#
3
mute on
Code
#
9
muto off
8. Day / Night use
It can be practical that the destination is altered during the night.
Eg. Pharmacists, doctors, …
How ?
Code
#
8x
Day setting
you hear 2 short beeps ;x=number of button
Code
#
8x
Night setting you hear 2 long beeps ; x=number of button
9. Camera control
In case the door telephone is equipped with a camera, it is possible to obtain a permanent image,
also when nobody rings at the door.
How?
Make a connection with the Wizard Elite (see point 1), and enter the following code:
Code #21
Camera ON
Code #20
Camera OFF
Remark: When code #20 is used, one will still obtain an image when someone rings at the door.
10. Function summary Wizard
SUMMARY USER CODES
FUNCTION
DEFAULT
SYSTEM
REMARK
Operation of (door) contact
opening
2
consult your installer
Setting speaker and micro door
station
raise
#
1
enter this code to raise the level
lower
#
7
enter this code to lower the level
Mute
on
#
3
micro temporarily switched off
off
#
9
micro switched back on
Forced loudspeaker of door station
speaker
#
4
maximum speaker level on door
station
Standard value sound levels
standard
#
5
reset default value sound levels
Forced micro of door station
micro
#
6
maximum micro sensitivity on
door station
